Woodworking Plans

ūüĒ•+ Woodworking Plans 04 Aug 2020 From a new floor to dedicated ceiling storage: how to make it all fit ‚Äď and work.

Woodworking Plans These DIY wood coasters are super easy to make, and feature a fun pop of color with brightly dyed wood veneer stripes!

How To Line Up Dowel Holes For Pumps
         
Ovidiu Woodworking Planshow to Woodworking Plans for 1 YOUR FAVORITES RANDOM PLAN

This step by step diy project is about¬†20×20 gable shed roof plans. This article is PART 2 of the 20×20 shed project, where I show you how to frame the gable roof. Add reinforcement to the roof if you live in an area with heavy snows or hurricanes. Take a look over the rest of my¬†woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day.

 

 

Projects made from these plans

Woodworking Planshow to Woodworking Plans for  

 

20×20 Gable Shed Roof Plans

Building a 20×20 shed with a gable roof

for 1 last update 2020/08/04   

  • G¬†– 4¬†pieces of T1-11 siding – 25 3/4″x48″ long, 2¬†pieces – 45 3/4″x48″ long, 1 piece – 48″x55 3/4″ long¬†END¬†PANELS
  • I¬†– 2 pieces of 2×6 lumber¬†– 144″ long, 1 piece – 240″ long, 2 pieces of 2×4 lumber – 20″ long, 1 piece – 44 1/4″ long, 2 pieces – 60″ long¬† for 1 last update 2020/08/04 11x11xTRUSS
  • J¬†– 8¬†pieces of 2×6 lumber – 144″ long, 28 pieces – 8 1/2″ long¬†OVERHANGS
  • K¬†– 12 pieces of 3/4″ plywood – 48″x96″ long, 6¬†pieces – 48″x48″ long, 4 pieces ¬†– 12″x96″ long, 4 pieces – 12″x48″ long¬†Woodworking Planshow to Woodworking Plans for ROOF
  • L¬†– 550¬†sq of tar paper, 550¬†sq of asphalt shingles¬†ROOFING
  • M¬†– 2 pieces of 1×8 lumber – 264″ long, 4 pieces – 145″ long¬†TRIMS

 One day

 

 

Make sure you follow me on Facebook to be the first that gets the latest plans and for some other exclusive content. Also, follow me on Pinterest and Instagram to get many ideas for your backyard from all the internet! Check out my YouTube channel! See how you can Support  Me with no extra costs to you. 

 

 

How to build a 20×20 gable shed roof

Building the rafters

The first step of the project is to build the trusses for the shed. As you can easily notice in the diagram, you need to make angle cuts to the 2×6 beams. Align the edges flush for a professional result.

Truss diagonal supports

Build the diagonal truss supports from 2×4 lumber. Mark the cut lines on the beams and then get the job done with a saw.

Assembling the trusses

Lay the rafters, the vertical and the diagonal supports on a level surface. Leave no gaps between the components and align the edges flush. Fit metal plate connectors over the joints to lock the components together tightly.

Fitting the trusses

Fit the trusses to the top of the shed. Use a spirit level to plumb the trusses perfectly vertically. Use rafter ties to lock the trusses to the side walls. Moreover, you could install blockings between the trusses, so you can seal the shed tightly.

Gable end panels

Cut the gable end panels from T1-11 siding, at the size and shape shown in the diagram. Align the edges flush and insert 6d nails, every 8″ along the framing.

Woodworking Planshow to Woodworking Plans for Assembling the overhangs

Build the overhnags for the shed from 2×6 lumber. After cutting the rafters, you need to attach the blockingds. Drill pilot holes through the rafters and insert 3 1/2″ screws into the blockings. You can adjust the size of the overhangs to suit your needs.

Fitting the overhangs

Fit the overhangs to the front and to the back of the storage shed. Align the edges flush, drill pilot holes and insert 3 1/2″ screws to lock them into place tightly.

Fitting the roof sheets

Fit the 3/4″ plywood sheets to the top of the shed. Align the edges flush and leave no gaps between the components. Drill pilot holes and insert 1 5/8″ screws every 8″ along the rafters.

Side roof trims

Fit the 1×8 trims to the sides of the shed. Align the edges flush and insert 2″ nails, to lock them into place tightly.

Front roof trims

Fit the trims to the front and to the back of the shed roof. Align the edges flush and insert the brad nails, so you can lock them into place tightly.

Fitting the roofing

Cover the roof of the shed with roofing felt, making sure the strips overlap at least 2″. Secure the tar paper to the plywood sheets with roofing staples. In addition, cut a large piece for the top ridge. Fit the side drip edges over the roofing felt, while the bottom drip edges should be fit under.

Read the instructions labeled on the asphalt shingle packs before installing them into place tightly. Start with the bottom left side of the roof and install them all the way to the top.

Woodworking Planshow to Woodworking Plans for 20×20 Shed for 1 last update 2020/08/04 Plans – Front view20×20 Shed Plans – Front view

Make sure you take a for 1 last update 2020/08/04 look over PART 1 of the project, so you learn how to build the  frame of the shed. Take a look over PART 3 of the project, so you learn how to frame the double doors and how to fit the decorative trims.Make sure you take a look over PART 1 of the project, so you learn how to build the  frame of the shed. Take a look over PART 3 of the project, so you learn how to frame the double doors and how to fit the decorative trims.

20×20 Shed Plans – Side view

Woodworking Planshow to Woodworking Plans for If you are are, I recommend you to check out the rest of my shed plans HERE. I have designed many sheds, starting with gable ones, up to lean to and gambrel ones. Moreover, I for 1 last update 2020/08/04 have lots of sizes to choose from.If you are are, I recommend you to check out the rest of my shed plans HERE. I have designed many sheds, starting with gable ones, up to lean to and gambrel ones. Moreover, I have lots of sizes to choose from.

 

the 1 last update 2020/08/04   

This woodworking project was about 20×20 gable¬†shed¬†plans¬†free.¬†If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

 






POSTED IN the 1 last update 2020/08/04 »» Shed
  • 12×24 Gable Roof Plans
  • 8×16 Gable Shed Roof Plans
  • 12×20 Gambrel Shed Roof Plans






  • ¬† ¬† ¬† ¬† ¬† ¬† ¬† ¬†¬†¬† ¬† ¬† ¬† ¬† ¬† ¬† ¬†¬†¬† ¬†¬†¬† ¬† ¬† ¬† ¬† ¬† ¬†

                                                  




    Woodworking Planshow to Woodworking Plans for One Comment »

    1. Kathryn Bolshazy at - Reply

      Woodworking Planshow to Woodworking Plans for Hello! Thanks for the awesome plans! By chance do you happen to know the number of metal plate connectors and rafter ties needed?
      Thanks again!




    Click here to cancel reply.















    *MyOutdoorPlans is participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Read More >>

    Copyright © 2012 - 2020 MyOutdoorPlans.com | All rights reservedCopyright © 2012 - 2020 MyOutdoorPlans.com | All rights reserved